Engine Spare Parts

• Cylinder Block
• 
• Cylinder block is the basic structure of the engine and works as an important component. It sits between the cylinder head and the oil pan. In a broad sense, it is an integrity part made up of several engine blocks and a crankcase...

• Cylinder Liner
• 
• Cylinder liner, or cylinder sleeve, is a device that is pressed into an engine block and used to house the piston. This engine spare part has stronger hardness than engine block and it prevents piston from wearing through cylinder bores. In aluminum engine blocks ...

• Camshaft Bush
• 
• 1. We provide you with three kinds of camshaft bushes, including bi-material linear bushing, bi-material hasp-joint bushing and slanting bushing. Composite materials are applied in shaft sleeve and they increase wear-resistance and thermal conductivity of bushes...

• Main Bearing
• 
• In piston engine, it is a fitting on which the crankshaft rotates. Our main bearings are mainly produced with bi-metal and tri-metal materials. Width tolerance of bearing is 0.05 mm, and wall thickness tolerance is 0.003 mm. A grooved crankshaft bearing utilizes both soft...

• Timing Gear Box
• 
• Timing gear box is a set of gears that synchronize rotation of crankshaft and camshaft. It promises that engine’s valves open and close at proper time during each cylinder’s intake and exhaust strokes. Timing belts are universally used in timing gear house because...

• Front Crankshaft Oil Seal
• 
• Front crankshaft oil seal products in our company are mainly pressure-less sintering silicon carbide (pressure-less SSIC), reactive sintering silicon carbide and hot-pressed graphite.
  1. Pressure-less sintering silicon carbide ...

• Oil Cooler Cover
• 
• Our oil cooler covers are mainly produced by Sinotruk and Weichai Power. With high strength, oil cooler lids can protect engine oil cooler from being damaged by outside items. Besides, good thermal conductivity assures that the cover can effectively conduct heat ...

• Flywheel Housing
• 
• Our flywheel covers are mainly produced by Sinotruk, Weichai Power and Hangzhou Jiulong Machinery. Flywheel housing is installed between engine and gearbox. Outside it, there are crankcase, starter, oil pan and internal flywheel assembly ...

• Crankshaft
• 
• Our crankshafts are made from nodular cast iron and forged steel.
  1. Weichai Forged Crank Axle
  It is mainly designed for diesel engine produced by Weichai Power. It is made from 45# steel ...

• Crankshaft Gear
• 
• Crank gear is applied to adjust position of camshaft so that valves open and close at proper time. It should be accurate in design and operation. Besides, high-temperature work condition requires crankshaft gears to be wear-resistant and erosion-resistant ...

• Flywheel
• 
• Our flywheels are produced by Weichai Power, Sinotruk Group and Weifang Zhengyi with HT20-40 as material. Static balance test and dynamic balance test are conducted during production. Its dynamic balance value is requested to be equal to or below...

• Flywheel Ring Gear
• 
• 1. Flywheel ring gear is a kind of starter ring gear which is fitted to the periphery of flywheel. It transfers torque from starter motor pinions to flywheel so that it drives engine into working. Our flywheel gears are mainly produced by Weichai Power, Sinostruk ...

• Crankshaft Shock Absorber
• 
• Crankshaft shock absorbers are cast with carbon steel and their surface receives quenching procedure during production. During motor rotation, variational torsion will cause torsional vibration in the crankshaft. Besides, free torsional vibration will arise...

• Piston
• 
• 1. Engine piston transfers thermal energy which is generated from fuel combustion into kinetic energy. Then with connecting rod, it moves back and forth in cylinder and produces traction power to make crank rotate.
  2. Aluminum alloy pistons are of good airtightness ...

• Piston Pin
• 
• Wrist pin is a cylindrical pin installed in piston skirt. It realizes kinetic energy transmission from piston to connection. Our hollow piston pins are made from superior alloy steel, such as No. 20 steel, 20Mn steel, 15Cr steel, 20Cr steel, 20MnV steel, etc ...

• Connecting Rod
• 
• Connecting rod or conrod is applied to connect engine piston to crank or crankshaft in a reciprocating piston engine. Together with the crank, they form a simple mechanism that converts reciprocating motion into rotating motion in a periodic way ...

• Piston Ring
• 
• Piston ring is a kind of split ring that fits into a groove on the periphery of piston in a reciprocating engine such as an internal combustion engine or steam engine. It is implied to seal combustion chamber so that there is no transfer of gases from combustion ...

• Connecting Rod Bearing
• 
• Our connecting rod bearing products are mainly bi-metal and tri-metal electroplated bearings. Width tolerance of the con rod bearing is 0.05 mm, and thickness tolerance is 0.003 mm. Special rotary surface of the bearing is made from interfaced ...

• Cylinder Head
• 
• Cylinder head sits above cylinder in an internal combustion engine. It closes off cylinder and forms a combustion chamber. Mixed inflammable gases in combustion chamber are kindled and release energy to motivate piston...

• Cylinder Head Gasket
• 
• In internal combustion engine, cylinder head gasket sits between engine block and cylinder head. It seals cylinders and avoids leakage of gas, coolant or engine oil. As a sealing part, it is requested to be of high strength.
  With metal compounded rubber sheet ...

• Camshaft
• 
• 1. Engine camshaft is an assembly of shaft and cam. In internal combustion engines, it is used to operate poppet valves. Our cam shafts are mainly made from alloy cast iron or chilled cast iron.
  2. Cast alloy iron is compound of molten iron ...

• Middle Gear
• 
• 1. Middle gear is a part of the rotating machine. It meshes with another toothed part in order to transmit torque, so it is requested to be wear-resistant, contact fatigue-proof, anti-flexural fatigue, heat-resistant and erosion-resistant.
  2. Our intermediate gears are applicable for engines ...

• Exhaust Air Valve
• 
• 1. Exhaust air valve is used to discharge exhaust air in cylinder and works as a part for gas exchange. Typical one is the sodium filled exhaust valve.
  2. Our valves are produced by Weichai Power, Jinan Worldwide Auto-Accessory, Guangdong ...

• Air Intake Valve
• 
• 1. Air suction valve is a fitting used to reduce emissions of exhaust gases. It can maintain requested gas pressure in the internal combustion engine.
  2. Our air intake valves are especially used in engines like D12, EGR2, WP12 and WD615. These valves ...

• Water Pump
• 
• 1. Water pump is a device that moves fluids (liquids or gases), or sometimes slurries, by mechanical action. We offer various products which are designed in different operation theories, including positive displacement pump, centrifugal pump, axial-flow pump ...

• Fan Blade
• 
• 1. Fan blade is a fitting for engine cooling. In high-temperature work condition, various problems may arise in the internal combustion engine, having negative impact on its function. So engine cooling blade is needed to remove high heat to make sure normal function ...

• Thermostat
• 
• 1. Thermostat is a component in control systems. It senses thermal change so that the system’s temperature is maintained near a desired setpoint. It maintains correct temperature by switching heating or cooling devices on or off, or regulating the flow ...

• Oil Pump
• 
• 1. In an internal combustion engine, the oil pump circulates engine oil from oil pan to rotating bearings, sliding pistons and camshaft. It is featured by simple structure, small size, small weight and large oil-transportation capacity...

• Oil Pump Valve
• 
• Oil pressure relief valve is usually installed in oil pump to help control oil capacity and oil pressure. Under high oil pressure, oil pump valve can normalize the oil pressure in oil gallery by opening ball valve. But in some engines, pressure-limiting valves...

• Oil Cooler Element
• 
• 1. Oil cooler is utilized in the large-power engine to cool down lubrication oil, keeping oil temperature in regulated scale. Generally, lubrication oil is always water-cooled or air-cooled by coolers. In high-temperature working condition, oil viscosity will decline, which reduces...

• Oil Filter Element
• 
• Engine oil filter is designed to remove sundries from engine oil. After long exposure to air, metal dust and airborne objects may fall into the lubrication oil, and the oxide will arise. Besides, colloid and impurities exist in oil ingredients. These sundries will increase friction...

• Coupling
• 
• 1. Shaft coupling is a device used to connect two shafts together at their ends for the purpose of transmitting power, it is composed of driving shaft and driven shaft. In high-speed and heavy-load power transmissions, some couplings are used for buffering...

• Oil Injector
• 
• 1. Engine oil injector is a high-accuracy device used to precisely control fuel oil injection according to pulse signals from ECU. It can increase oil pressure to 10 MPa or 20 MPa, and control oil injection time and oil injection volume. There are various...

• Fuel Filter Element
• 
• 1. Engine fuel filter is a filter line that screens out dirt and rust particles from fuel oil. After phenolic resin treatment, it is normally made into cartridges containing micropore filter papers. It is featured by high filtering efficiency, simple structure, low cost and convenient...

• Gear Reduction Starter
• 
• Gear reduction starter is an engine starter with a gear decelerator. It is installed between armature shaft and drive gear. Common types are external-gear deceleration starter, internal-gear decelerating starter and planet-type decelerating starter. Our reduction starters...

• Alternator
• 
• 1. Alternator is an electromechanical device that converts mechanical energy to electrical energy. It sits in mechanical drives, translating energy from water/air flow, combustion or atomic nucleus fission into alternating current. In motor industries...

• Electromechanical Oil Pressure Sensor
• 
• 1. Electromechanical oil pressure sensor is used to inspect hydraulic oil pressure with MEMS (microelectromechanical systems). The oil pressure sensor consists of a micro-sensor and a microprocessor, which are used to process signals ...

• Water Temperature Gauge Sensor
• 
• In an internal combustion engine, coolant temperature sensor is used to measure temperature of the engine coolant. It is installed in cylinder block or in water jacket on cylinder cover. There is a thermistor inside the water temp sensor. If coolant temperature is lower...

• Front Air Exhaust Pipe
• 
• In automotive engineering, exhaust manifold is used to collect exhaust gases from multiple cylinders into one pipe. Exhaust resistance is requested to be as small as possible in case that exhaust gas in one cylinder flows into another cylinder. Besides...

• Rear Air Exhaust Pipe
• 
• In automotive engineering, an exhaust manifold is used to collect exhaust gases from multiple cylinders into one pipe. Exhaust flow resistance is requested to be small in case that exhaust gas in one cylinder leaks into another cylinder. Besides, pipe branches...

• Turbocharger
• 
• Turbocharger, or turbo, allows more air to inflow into turbocharged engine.It greatly increases output power. Like an air compressor, it compresses the air sucked in by air filter, and presses the compressed air into cylinder. With faster engine rotation speed, exhaust...

• Double Cylinder Air Compressor
• 
• Two cylinder air compressor is a device that compresses air and pressurizes the compressed air for energy storage. Air compressed by the double cylinder air compressor is a kind of important power source which is pollution-free, clean and harmless...

• Oil Pan
• 
• As part of oil storage tank, engine oil pan is seated over bottom of engine and closes off crankcase for the purpose of sundry-resistance, lubrication oil collection and energy release. It is made from thin steel plate. Inside the engine oil sump, a baffle is used to prevent...

Chassis Spare Parts Back to Top

• Straight Push Rod
• 
• Anti-roll push rod assembly is made up of three rigid bars. Connecting chassis frame with axles, it works to transmit torque and bear loads. Middle rigid bar is parallel to the axle, and the other two bars are symmetrical with each other. Processed ...

• Balance Shaft Housing
• 
• As part of truck balance suspension, balance shaft housing is a casing to protect balance shafts. On its top, there is a horizontal spring groove with bolt holes. There is a thrust bolt on the bottom of spring groove. With light weight, the compacted balance shaft casing...

• Shock Absorber
• 
• Shock absorber is a mechanical device designed to smooth out shock impulse and dissipate kinetic energy. That is to say, it is a dashpot used to weaken vibration.
  Lantoky Truck Parts is authorized dealer of China National Heavy Duty ...

• Push Rod Bolt
• 
• Push rod bolt is a bolt fixed in push rod. In push rod assembly, it is used to joint rigid bars. We offer propelling rod bolts which are of different length (long, moderate-length and short ones).
  Our propelling rod bolts are cheaper than those...

• Spider Universal Joint
• 
• Universal joint, also universal coupling or cardan joint, is used to allow rigid rod to bend in any direction. It is commonly used in shafts that transmit rotary motion. Our U-joint products are able to accurately control relative location between two rods, making these rods...

• Main Gearbox for Medium Bridge
• 
• In torque transmission system, main gearbox is the most important part used to reduce rotation frequency and increase torques. Main reduction gear assembly is composed of intermediate-axle casing, end cap, bevel gears, flanges, hexagon bolts, etc....

• Differential Assembly
• 
• Differential assembly is a device that usually employs gears to transmit torque and rotation. It is applied to transmit torque from one axle to another, making the two axles rotate with different frequency. According to work location, it can be categorized into several types...

• Adjusting Arm
• 
• In truck braking system, slack adjuster is used to adjust brake clearance between brake drum and brake lining. It has two types, namely automatic and hand-operated adjusting arms. The latter is only available for common automobiles. But to the heavy truck which needs ...

• Haft Shaft
• 
• Half shaft is a drive shaft that connects a rear differential to a rear wheel. It transfers output torques from differential assembly to driving wheel or hub reduction gear.
  Apart from drive shafts (including half shafts), our company provides more than 2000 kinds of other truck parts ...

• Steering Draw Bar
• 
• Automotive steering linkage is a fitting which connects knuckle joint to steering pinions. It transfers input torque from the steering wheel to the front wheel. There are two kinds of steering draw bars, namely steering drag link and steering tie rod. In the steering column ...

• Wheel Hub Assembly
• 
• Wheel hub assembly, also wheel hub unit or wheel hub bearing, is used to transfer torque from transmission to rear-axle main reducing gear, and then to hub reduction gear. It is composed of annular gear, planet carrier oil baffle, planet gear, etc ...

• Steering Knuckle
• 
• Steering knuckle is a part of the automotive suspension. It is composed of wheel hub and spindle. It is also called steering upright, steering hub or steering spindle. They are used in various trucks, including HOWO, Shacman Delong 2000, Shacman Delong F3000, etc ...

• Rear Hub
• 
• In truck braking system, rear hub is an important part which is installed at ends of the axle. It is located between brake drum and assembly of bearings, annular gears, etc.
  Our suppliers are mainly state-owned top truck manufacturers. So, these rear hubs are inspected...

• Brake Drum
• 
• Brake drum is an important component of the drum brake. It is connected with brake shoes and wheel hub assembly. It makes use of friction to halt wheels which are rotating. To make driving smooth and safe when a truck is riding on the uneven road, it is requested ...

• Brake Shoe
• 
• In automotive braking system, brake shoe is a part which carries the brake lining. It is made up of rivet and brake block. There are 8/9/14-hole types for choice. They are used in trucks like HOWO and Shacman Delong.
  As an authorized dealer of China National ...

• Brake Lining
• 
• Brake lining, also brake block, is the key component in automotive braking system. According to the material, they can be divided into asbestine/ metal/ semimetal braking blocks.
  Considerate services are offered to customers...

• Thru Shaft Flange
• 
• Drive shaft flange is widely used in intermediate axle of heavy trucks. A flange is an external or internal ridge, sometimes, also the rim of an iron beam. Our company provides various thru shaft flanges for trucks of HOWO, Shaanxi Delong, etc...

• Steel Plate Spring Seat
• 
• In automotive suspension, steel plate spring seat is installed to bear the chassis steel plate and damp vibration. Spring seats are mainly designed for Shacman Delong F2000 (DZ9114520224 and DZ9114520223), Shacman Delong F3000 ...

• Rear U Shaped Bolt
• 
• In the balance suspension, U Bolt is used to fasten leaf spring to spring seat. A rear U shaped bolt can increase bearing capacity of automobiles. Besides, it can damp the jolt of automobiles caused by uneven floor. So, it can make vehicle stable and safe during driving ...

• Brake Camshaft
• 
• Brake camshaft is a part of the front drive axle. It is used to halt the adjusting arm, and adjust the spacer shim and swing arm. There are two kinds of brake cam shafts, namely left braking camshaft and right braking camshaft. They are used in Shacman F3000 ...

• Rear Oil Seal
• 
• Oil seal is used to seal lubrication oil and prevent the oil from leaking out. Rear wheel oil seals sold by us are made from durable superior rubber. They are widely applied in trucks of various models. Common types are rear wheel inner oil seals and rear wheel ...

• Rear Wheel Bearing
• 
• Rear wheel bearing is exactly like what it sounds, it’s a bearing for a rear wheel. It is a bunch of steel balls held together by a metal ring which is called a race. There are many different styles of bearings similar to the truck wheel bearings. They help a device ...

• Rear Wheel Bolt
• 
• Rear wheel bolt is a wheel screw that is fastened to brake drum. It is used to fix fittings inside the rear wheel. Our wheel bolt products are widely used in trucks of HOWO and Shacman Delong. High rigidity (above Grade 12) can promise high security during driving ...

• Steering Knuckle Repair Kit
• 
• Steering knuckle repair kit is a package of replacement components for steering knuckle. In automotive suspension, steering knuckle is the part which contains wheel hub or spindle. Our repair kit for truck steering knuckle is designed for STR ...

• Leaf Spring
• 
• Leaf spring is a simple form of spring commonly used for suspension in wheeled vehicles. Originally it is called laminated spring or carriage spring. In automobile chassis, steel spring assembly is used to attenuate vibration caused by shock ...

Clutch Spare PartsBack to Top

• Clutch Pressure Plate
• 
• Clutch pressure plate is an important part of vehicle clutch. Clutch is a mechanical device used to transfer or cut off power from engine to transmission. Other main components of the clutch are flywheel, clutch disk, release bearing, clutch fork, pump and clutch ...

• Clutch Disk
• 
• Clutch disk is a kind of friction disk that transfers motion from engine to transmission. In the past, it mainly applied asbestos as one of its materials. But now asbestos clutch disc is largely eliminated, instead, semimetal or complex fiber friction discs are popularly utilized...

• Clutch Release Bearing
• 
• The clutch release bearing is an important automobile part installed between vehicle clutch and transmission. During synchronic revolving of clutch plate, clutch release lever and engine crankshaft, a clutch release thrust bearing helps to make clutch engagement ...

• Clutch Power Cylinder
• 
• Clutch booster cylinder is a kind of clutch slave cylinder used in hydraulic clutch system. It is usually attached to the manual transmission by two bolts. Clutch power cylinder has a rod that extends out when the clutch master cylinder applies hydraulic pressure to it...

• Clutch Pump
• 
• In automotive engineering, the clutch master cylinder is a control device that converts pressure from clutch pedal into hydraulic pressure and makes clutch release. Clutch master pumps sold by us are applicable in various trucks, including HOWO, Shacman Aolong...

• Clutch Housing
• 
• Clutch cover is a device connected to flywheel through bolts. This kind of rotary clutch housing is used to bear clutch plate. These products sold by us are mainly installed in trucks of HOWO, Shacman Aolong, Shacman Delong, SWZ, DFM, etc...

• Clutch Release Fork
• 
• As an important part in the clutch system, clutch fork is made of steel and shaped into the two-pronged fork. It connects clutch release bearing to slave cylinder, and then the slave cylinder makes clutch release fork move. Our products are mainly for various trucks ...

Automobile Interior Trim PartsBack to Top

• Power Door Lock
• 
• Vehicle power door lock is a device that allows driver to lock or unlock vehicle door by pressing a button or flipping a switch. It consists of lock, lock body, stop block, control mechanism, full-lock position, semi-lock position, etc. Electric door locks sold by us ...

• Instrument Board
• 
• Instrument board is a combination of several gauges and meters like ammeters, dynamometers, fuel gauges, hydrometers, odometers, speedometers, etc. Our automotive combined gauges are mainly used by trucks with Euro III engines...

• Electronic Control Unit
• 
• In automotive electronics, electronic control unit (ECU) refers to any controlling system. Common vehicle control modules are engine control module, general electronic module, suspension control module, brake control module, etc...

• Glass Lifting Equipment
• 
• Window regulator is a device that raises and lowers the vehicle window glass. It is mainly composed of motor and reducer. Hand-operated window glass lifters or electric ones are commonly used in automotive windows. Vehicle window assemblies sold by us are mainly...

• Inside Door Handle
• 
• In a truck, vehicle interior door handle is a device mainly used to open or lock the door. The inside door handle consists of handle, axle sleeve, controllable spindle etc. Truck door handles sold by us are simple in structure and durable for use...

• Door Handrail
• 
• Door handrail is a kind of vehicle handrail (there are also other kinds, such as the interior handrail) grasped by passengers when they get on vehicles. It can provide stability or support, which makes it popularly used in buses especially when the footboard ...

• Steering Wheel
• 
• Steering wheel is also called driving wheel or hand wheel. It is usually used in vehicles and vessels for the purpose of steering control. Our products are applicable in trucks produced by Sinotruk (such as HOWO, STR, HOYUN), Shaanxi Automobile ...

• Gear Shift Bar
• 
• In the automotive transmission, gear shifter is used to change gear. Common gear levers in heavy trucks are in shift patterns of 8 speed, 9 speed, 10 speed or 12 speed. Our gear sticks in 8 or 9 speed pattern are mainly produced by Shaanxi Automobile ...

• Gas Pedal
• 
• Truck gas pedal is also called accelerator pedal. As part of fuel supply system, it controls gas feeding in the engine by pressing the pedal into different angle. Then, it can control speed of the truck.
  Firstly, loose the screw but do not take off the nut ...

• Glove Compartment
• 
• Glove compartment is generally called glove box. It is a small storage container in the dashboard of automobiles. Driver can put articles in the box for daily or emergency use. It is applied in HOWO trucks.
  Lantoky Truck Parts..

• Seat Shock Absorber
• 
• Seat shock absorber is a mechanical device used to smooth out or damp shock impulse of the automotive seats. Seat damper assembly is a type of truck seat dashpot which is composed of elastic rod and damper.
  Adjust stiffness coefficient (K) of the elastic rod...

• Handle Brake Valve
• 
• In the truck braking system, manual brake valve is a device used to control the brake spring by hands. Truck hand brake valve is composed of handle, cam, torsional spring, tappet, balance spring, balance piston, valve, etc. During installment of the valve ...

Exterior Car Accessories Back to Top

• Truck Door
• 
• Truck door is used to let a person enter or exit the truck. Various elements are applied in judging quality of the vehicle door, including crashworthiness, sealing, convenience, etc. Among all the quality factors, crashworthiness is most important...

• Sun Shade
• 
• Truck sunshade is used to prevent the truck shell from being damaged by ultraviolet. But, if the truck is exposed to sun, temperature inside the truck may also increase. So, the most efficient way to protect the truck is to put it in shade place. According to different cabs...

• Front Cover
• 
• Truck front grille is a metal cover which is composed of several slits. It is designed for the purpose of only letting air or water enter or leave out. Front cover has various subassemblies like handrail, hinge, blanking cap, bumper block, lock, etc. These products...

• Fender
• 
• As a covering part, wheel fender (generally called wheel wing in British English) is used to decrease friction coefficient caused by wind. It is composed of front panel, front lining, front light, rear light and radiator frame. According to hydromechanics...

• Headlight
• 
• Truck headlight is attached to the front of a truck to light the road ahead. Modern headlamps are electrically operated. They are positioned in pairs, with one or two on each side of the front of vehicles. Light system can produce a low beam and a high beam...

• Step Pedal
• 
• Truck step plate is a part on which passengers or drivers stand. It is composed of standing pedal, interior protection board, aluminum lining plate, junction plate, frame, etc. We mainly provide step pedals for trucks of HOWO and Shaanxi Automobile...

• Rear Wheel Mud Guard
• 
• Combined with vehicle fender, truck wheel mud guard is used to obstruct mud, water and other flying debris from spraying onto vehicles or persons. It can keep truck clean. We provide metal or plastic truck wheel splash guards for various trucks like Hongyan ...

• Safety Tread
• 
• Anti-skip safety tread is always applied in truck pedal for the purpose of preventing passengers from slipping down. We provide various anti skip plates for trucks of HOWO, Shacman Delong, STRW, Huanghe Wangzi (Yellow River Prince), etc. Our anti-skip pedals are in black...

• Truck Bumper
• 
• Truck bumper is a part that allows the truck to sustain an impact and protect truck’s safety system. Besides, it can reduce injury to passengers and drivers when the vehicle is struck by another vehicle. The bumper is composed of bumper filler, cross-member and outer plate...

• Truck Wind Scooper
• 
• 1. Truck wind scooper sits on top of the truck cab. It is used to decrease air friction and make the vehicle run in higher speed. Besides, it can keep sunshine from dazzling the driver, which makes driving safe and convenient.
  2. Four colors (red, white, green and yellow) ...

Gear Box Spare PartsBack to Top

• Gear Gasket for Output Shaft
• 
• Gear gasket is a mechanical seal used to fill the space between two or more surfaces for the purpose of preventing leakage. As one of transmission spares products sold by us, here it refers to the gasket for output shaft (a spline seal). Our spline ...

• Sliding Sleeve for Output Shaft
• 
• Sliding sleeve refers to a component in output shaft. It belongs to transmission parts. Our slide sleeves for output shaft are especially applied in gearbox (12JS160T) produced by Shaanxi Fast Gear.
  Lantoky Truck Parts..

• Gear Fork
• 
• As main component of the gear shift, shift fork is used to change transmission ratio so that rotations between gears can be synchronized. Gear forks sold by us are special ones for 1st speed and 2nd speed gears. They are available in RT-11509 C gearbox ...

• Speed Reduction Gear
• 
• Reduction gears provided by us are designed for gearbox of Fast Gear. They are mainly used in trucks of STEYR and HOWO. As a part of the speed reducer, it can increase torques and decrease rotation speed.
  Shanghai Lantoky Sino Truck Parts has storage area ...

• Reverse Gear Fork
• 
• Reverse gear forks offered by us are mainly applied in gearbox from Shaanxi Fast Gear. Fat Gear gearbox is often installed in trucks of HOWO and Automan.
  Lantoky Truck Parts is a supplier of truck spare parts and accessories ...

• Main Shaft
• 
• Gearbox mainshafts sold by us are mainly used in gearboxes of Fast Gear. And the gearboxes are often installed in trucks of Sinotruk, FAW and Shaanxi Automobile. Besides, we also provide other transmission parts such as gear gaskets, gear forks, etc ...

• Synchromesh
• 
• In the gear box, synchromesh is a transmission synchronizer which engages the gear with a cone clutch and then locks the teeth tightly with its special barb teeth. It can synchronize two gears which are at different speeds.
  We provide various transmission spare parts ...

• Shift Valve
• 
• In a gearbox, shift valve is used to change one certain speed into another. Our transmission valves are mainly designed for gearboxes produced by Shaanxi Fast Gear. These gearboxes are specially installed in trucks of Shaanxi Automobile, Sinotruk and DFM...

Other PartsBack to Top

• Oil Tank
• 
• In the hydraulic pressure system, fuel tank is used for fuel storage, besides, it can cool down the oil and filter out sundries. Oil tanks provided by us are mainly produced by famous automobile manufacturers, such as Sinotruk and Shaanxi Automobile. So, cost performance ...

• Oil Tank Sensor
• 
• Oil level sensor is widely used in petrol tank, fuel tank or oil tanker for the purpose of measuring the oil volume. This fuel level sensor is always a capacitive sensor.
  1. According to the oil capacity of tanks, there are oil level sensors for oil tanks with capacity of 200L ...

• Oil Tank Cap
• 
• Oil tank cap is a kind of sealing fitting on the oil tank. It prevents sundries from falling into the fuel tank and avoids oil leakage. An oil filler cap is generally made from stainless steel, and it locates in rear part of a vehicle. This oil tank lid is as small as a bottle lid ...

• Air Filter Element
• 
• In an air compressor, air filter is an important protective barrier to prevent particulate. It can make air cleaner, which can prolong work life of the oil-gas separating devices. Generally, rated work life of the filter element is 2000 hours. But, if it is clogged seriously ...

• Radiator
• 
• An engine radiator is a heat exchanger used to transfer thermal energy and cool down the engine. Automobile radiators provided by us are mainly used in trucks of Sinotruk and Shaanxi Automobile. Our auto radiators are in six kinds of horse power (200 hp, 280 hp ...

• Air Dryer
• 
• In a truck, air dryer is installed between the air compressor and the tank for the purpose of filtering out water vapor, oil vapor and other volatile liquid. It helps prevent freeze-up during winter and extends the life of air valves.
  1. For convenience of replacing the drying cylinder...

• Cabin Lift Pump
• 
• Cabin lift pump is constituted by lift pump, relay, oil cylinder and fuel injection pipe. Only each component is functioning well can the cabin be lifted smoothly. During repairing of the cab pump, check the electronic lifting performance, and then check the hand pump...

• Rubber Bracket
• 
• A rubber bracket is used to support a container or a device and stably fix the container or device in its original working location. Besides, the rubber plinth can bear vibration during operation or bear seismic load caused by earthquake. Its components, the rubber ...

• Engine Repair Kit
• 
• An engine repair kit is a toolkit for repairing or overhauling the engine. In an engine rebuild kit, there are various engine accessories, such as the multiple gaskets for exhaust pipes, gears, air intake pipes, cylinders, cylinder heads and oil sealings, etc ...